KLINGERSIL® C-4509
KLINGERSIL® C-4509 is a special high-pressure gasket for highest thermal and mechanical stresses. Due to the expanded metal reinforcement it offers a high stress capability and is suitable for high bolt loads
Key features
Utilization of carbon fibres
Expanded metal reinforcement
Improved stress relaxation
Benefits
Suitable for high-pressure applications
Higher resistance against blow-outs
More safety at high internal pressures
Typical technical data for thickness 1.5 mm
Compressibility ASTM F 36 J | % | 10 | |
Recovery ASTM F 36 J | % | 62 | |
Stress relaxation DIN 52913 | 50 MPa,16 h / 300 °C | MPa | 43 |
Stress relaxation BS 7531 | 40 MPa, 16 h / 300 °C | MPa | 41 |
KLINGER cold/hot compression | thickness decrease at 23 °C | % % | 8 6 |
Thickness increase after fluid | Oil IRM 903: 5 h / 150 °C | % % | 3 5 |
Density | g/cm3 | 2.0 |
ASME-Code sealing factors
for gasket thickness 1.0 mm | tightness class 0.1 mg / s x m | MPa | y 30 |
for gasket thickness 1.5 mm | tightness class 0.1 mg / s x m | MPa | y 30 |
for gasket thickness 3.0 mm | tightness class 0.1 mg / s x m | MPa | y 30 |
Dimensions of the standard sheets
Sizes KLINGERSIL® C-4509 | 1000 x 1500 mm, 2000 x 1500 mm |
Sizes KLINGERSIL® C-4509 L | 1000 x 1230 mm, 2000 x 1230 mm |
Thicknesses | 1.0 mm, 1.5 mm |
Tolerances | Thickness acc. to DIN 28091-1 Length ±50 mm, Width ±50 mm |
Other thicknesses, sizes and tolerances on request.
Function and durability
The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting - factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our installation manual.